Detailed Production Process Of Burning Paper Machine

"Painting paper machine" is the equipment for producing meditation paper. Because of the trend of profit, it has become a hot industry for investment! However, for the performance of the machine and the use of many people are ignorant!

The professional paper-making machine introduces the production process in detail:

First, the production process flow chart:

Raw materials (waste paper) - raw material crushing - double disc refiner - vibrating screen - pulp well - slurry pump - rinsing, bleaching - centrifugal sieve - stirring - slurry pump - paper machine - Paper cutter - finished product

Second, the host introduction:

(1) Description of use: yellow board paper

(2) Net paper width: 1092mm---1190mm

(3) Working speed: 10 - 90 m / min

(4) Quantity: 50 - 250 g / square

(5) Production capacity: 4-6 tons/day

Third, the host device parameters:

Diameter of the net: ¢1250mm×1450mm 3

Roller: 380 380mm × 1450mm 2

Back Roll: ¢ 350mm × 1450mm 1 (Rubber hardness is 38 degrees plus or minus 2)

Pressing section: ¢ 400mm × 1450mm 1 (Rubber hardness is 90 degrees ± 120 degrees)

¢ 450mm × 1450mm 1 (stone roll)

Drying cylinder diameter: ¢2500mm×1450mm 2

Roller: ¢ 450mm × 1450mm 2 pieces (rubber hardness is 90 degrees plus or minus 2)

Fourth, pulping equipment:

(1) Hydraulic pulper 1

(2) 13 type vacuum pump 1 set

(3) 6-inch slurry pump 2 sets

(4) Drying hood 1

(5) Centrifugal sieve 1 set

(6) Suction box 2 sets

(7) Mixer 1 set

(8) Double disc grinding 1 set

(9) Type 606 Sand Remover 2